粉刷石膏粉的注意事項具體是什么呢？為了讓大家更好的了解以便于后期的順利施工使用，下面濟南石膏粉廠家來講講這個問題。

What are the precautions for plastering gypsum powder? In order to let everyone better understand and facilitate the smooth construction and use in the later period, the following Jinan gypsum powder manufacturer will talk about this problem.

粉刷石膏粉在粉刷墻面的時候有兩方面的作用，一個是填充墻面縫隙，另一個是粉刷墻面使之細膩平整。這兩種用途使用的是不同種類的粉刷石膏粉。

Plastering gypsum powder has two functions when painting the wall, one is to fill the gap in the wall, and the other is to paint the wall to make it delicate and smooth. These two uses use different kinds of plaster powder.

粉刷石膏是采用半水石膏為基本材料，高分子聚合物為膠凝材料，無機填料經干混而成。是一種新型改良內墻粉刷材料，改變了以水泥基為膠凝材料的習慣，與各種基底墻都有很好的相容性和粘附力。

Plastering gypsum is made of hemihydrate gypsum as the basic material, polymer as the cementitious material and inorganic filler through dry mixing. It is a new type of improved interior wall painting material, which changes the habit of using cement-based cementitious materials, and has good compatibility and adhesion with various base walls.

粉刷石膏粉的注意事項：

Precautions for plastering gypsum powder:

1、挑選適宜的勺子，勺子的巨細需與出產石膏線條的寬度、厚度成正比，越寬越厚的線條需求的石膏粉越多，選用的勺子也就越大。在勺子中參加清水，然后灑入石膏。

1. Select a suitable spoon. The size of the spoon should be proportional to the width and thickness of the gypsum line produced. The wider and thicker the line, the more gypsum powder required, and the larger the spoon selected. Join the water in the spoon and then sprinkle the plaster.

2、將拌和好的石膏漿倒入模具中，疾速轉動模具，使石膏漿均勻的粘滿模具，直到石膏漿不再流出摸具。

2. Pour the mixed gypsum slurry into the mold, rotate the mold quickly, and make the gypsum slurry stick to the mold evenly until the gypsum slurry no longer flows out of the mold.

3、脫模：待石膏干后，將石膏像放于平地，先將夾子拿掉，然后兩手從底部開始漸漸剝去模具。(脫模時要手朝模具里邊漸漸脫模，如有雜亂當地欠好脫模，可在模具外表倒適量開水使模具變軟再脫模)。

3. Demoulding: after the gypsum is dry, place the gypsum image on the ground, remove the clamp first, and then peel off the mold gradually with both hands from the bottom. (during demoulding, the mold should be demoulded gradually by hand toward the inside of the mold. If there is any disorder or poor demoulding, pour an appropriate amount of boiling water on the surface of the mold to soften the mold before demoulding).

粉刷石膏粉的注意事項就是這樣了，您對此有什么想知道的或者有疑問，就來我們網站http://www.daquanq.com.cn進行咨詢了解吧！

This is the precautions for plastering gypsum powder. If you have any questions or questions about this, please come to our website http://www.daquanq.com.cn Consult and understand!