濟南膩?zhàn)臃郏捷p松修復家庭墻面起皮掉粉難題

　　Jinan putty powder, three easy steps to repair the problem of peeling and powder on home walls

　　在濟南的很多家庭里，墻面起皮掉粉是個讓人頭疼的常見問題--一摸一手白，不僅影響美觀，還可能滋生粉塵影響健康。不少人覺得修復就是簡單刷層漆，結果往往是問題反復。其實，墻面非結構性的脫皮掉粉，根源多在基層松動或處理不當，想要徹底解決，選對濟南本地適配的膩?zhàn)臃郏侔匆?guī)范步驟操作才是關鍵。今天就為大家科普，如何用膩?zhàn)臃壅_修復破損墻面。

　　In many households in Jinan, peeling and powdering on the walls is a common headache - it not only affects the appearance, but also may breed dust and affect health. Many people think that repair is just a simple layer of paint, but the result is often repeated problems. In fact, the root cause of non structural peeling and powder loss on walls is often due to loose or improper handling of the base layer. To completely solve this problem, it is crucial to choose the appropriate putty powder that is suitable for Jinan and follow the standardized procedures. Today we will explain to you how to correctly repair damaged walls with putty powder.

　　先說說修復前的準備工作，選對材料是基礎。考慮到濟南四季分明、夏季多雨冬季干燥的氣候特點，膩?zhàn)臃垡欢ㄒx耐水型的，這樣才能避免后期因潮濕或溫差變化再次出現掉粉問題。除此之外，還需要準備刮刀、清水、界面劑（或固砂劑）、中粗和細目?jī)煞N砂紙、毛刷或滾筒、噴水壺以及防護口罩。其中界面劑是固化墻面的核心材料，能有效防止修復后再次脫粉，防護口罩則是清理環節不可或缺的，避免吸入過多粉塵。

　　First, let's talk about the preparation work before repair. Choosing the right materials is the foundation. Considering the distinct four seasons, rainy summers, and dry winters in Jinan, it is necessary to choose water-resistant putty powder to avoid the problem of powder falling again due to humidity or temperature differences in the later stage. In addition, it is necessary to prepare a scraper, clean water, interface agent (or sand fixing agent), medium coarse and fine sandpaper, brush or roller, spray bottle, and protective mask. The interface agent is the core material for curing the wall, which can effectively prevent powdering again after repair. Protective masks are indispensable in the cleaning process to avoid inhaling too much dust.

　　第一步是徹底清理墻面，這一步最忌偷懶。濟南部分老房子墻面基層本身就不牢固，加上長期受溫濕度變化影響，松動范圍可能比肉眼所見更大。清理前先用噴水壺把墻面表面噴濕，這樣能減少粉塵飛揚，再戴上防護口罩做好防護。之后用刮刀把表面不結實的墻皮全部鏟掉，若清理過程中粉塵仍較大，可隨時用噴水壺霧化噴水降塵。務必確保所有松動、起皮、空鼓的部分都清理干凈，直到露出堅實的基層，否則后續修復層很容易跟著脫落。

　　The first step is to thoroughly clean the wall, which is the most important step to avoid laziness. Some old houses in Jinan have unstable wall foundations, and due to long-term changes in temperature and humidity, the range of looseness may be larger than what is visible to the naked eye. Before cleaning, wet the wall surface with a water sprayer to reduce dust flying, and then wear a protective mask for protection. Afterwards, use a scraper to remove all the loose surface of the wall. If there is still a large amount of dust during the cleaning process, you can use a water sprayer to atomize and spray water at any time to reduce dust. Make sure to clean all loose, peeling, and hollow parts until a solid base layer is exposed, otherwise the subsequent repair layer is easily detached.

　　第二步是加固與找平，這是修復效果的核心保障。清理后的墻面如果摸上去還有掉粉情況，不能直接刮膩?zhàn)樱人⒁槐榻缑鎰ɑ蚬躺皠渫耆稍锕袒螅瑝γ婢筒粫?huì)再掉粉了。接下來就是用耐水膩?zhàn)臃壅移剑{(diào)和膩?zhàn)臃蹠r(shí)用清水?dāng)嚢杈鶆颍幢悴皇菍I(yè)施工，也盡量把膩?zhàn)訉幽ǖ闷秸５饶佔油耆稍锖螅扔弥写稚凹埌驯砻娲蚰テ秸儆眉?xì)砂紙進行收光處理，讓墻面觸感更細膩，為后續上漆做好準備。這里要注意，濟南夏季潮濕，膩?zhàn)痈稍飼r(shí)間可以適當延長，避免未完全固化就打磨。

　　The second step is reinforcement and leveling, which is the core guarantee for the repair effect. If there is still powder falling off the cleaned wall surface, it cannot be directly coated with putty. It is necessary to first brush the interface agent (or sand fixing agent), and after it is completely dry and cured, the wall surface will no longer have powder falling off. The next step is to level with water-resistant putty powder. When mixing the putty powder, mix it evenly with clean water. Even if it is not a professional construction, try to smooth the putty layer as much as possible. After the putty is completely dry, first use medium coarse sandpaper to polish the surface flat, and then use fine sandpaper for finishing treatment to make the wall feel more delicate, preparing for subsequent painting. It should be noted that Jinan is humid in summer, and the drying time of putty can be appropriately extended to avoid polishing before fully curing.

　　第三步是上漆與收尾，讓墻面既美觀又耐用。選擇適配的面漆，用毛刷或滾筒橫豎交替涂刷，反復多次確保涂刷均勻，避免出現刷痕或漏涂。待面漆完全干燥后，破損的墻面就徹底煥新了，不僅解決了起皮掉粉的問題，還能恢復整潔美觀的外觀。

　　The third step is painting and finishing, making the wall both beautiful and durable. Choose the appropriate topcoat and use a brush or roller to apply it alternately horizontally and vertically, repeatedly ensuring even application and avoiding brush marks or omissions. After the topcoat is completely dry, the damaged wall will be completely rejuvenated, not only solving the problem of peeling and powdering, but also restoring a clean and beautiful appearance.

　　其實墻面修復并不復雜，只要找對根源、選對濟南本地適配的耐水膩?zhàn)臃郏侔础扒謇?加固找平-上漆”的步驟操作，就能輕松解決非結構性的起皮掉粉問題。家里有墻面破損困擾的朋友，不妨按這個方法試試，讓墻面重新恢復干凈整潔的狀態。

　　In fact, wall repair is not complicated. As long as you find the root cause and select the appropriate water-resistant putty powder suitable for Jinan, and then follow the steps of "cleaning reinforcement leveling painting", you can easily solve the problem of non structural peeling and powder peeling. Friends who are troubled by wall damage at home may try this method to restore the wall to a clean and tidy state.

　　本文由  濟南膩?zhàn)臃?/a> 友情奉獻.更多有關的知識請點擊  http://www.daquanq.com.cn/   真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Jinan Putty Powder For more related knowledge, please click http://www.daquanq.com.cn/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.