The reason for the delamination during the use of putty powder is that the details are not paid attention to when using, which leads to the phenomenon of delamination in the later stage of use. Therefore, we should pay attention to different solutions if we want to reduce this kind of situation, so we should pay attention to the following problems.

1、鏟除脫落層，重新選擇專用膩子批蕩；

1. Remove the falling layer and re select the special putty;

2、嚴重粉化的施工面，更好用10%睡寶封閉底漆稀釋液進行封固，待干燥后，再進行相應的膩子層或其他施工；

2. The construction surface with serious pulverization should be sealed with 10% Shuibao sealing primer diluent. After drying, the corresponding putty layer or other construction should be carried out;

3、膩子尤其是內(nèi)墻膩子，盡可能縮短兩道膩子施工的間隔；

3. For putty, especially for interior wall putty, the interval between two putty construction should be shortened as much as possible;

4、注意施工過程防護，在膩子施工過程中或施工后8小時之內(nèi)，膩子更好不要被水浸潤；

4. Pay attention to the construction process protection, in the putty construction process or within 8 hours after the construction, the putty had better not be soaked by water;

5、膩子選用時，咨詢的膩子粉廠家，他們會給您指導。

5. When choosing putty, consult the putty powder manufacturer and they will give you guidance.

膩子粉出現(xiàn)脫層是非常影響后期的裝修和效果的，所以在施工過程中就要多加注意，盡量避免這種情況的發(fā)生。所以我們要注意相應的問題，

Putty powder delamination is very affect the later decoration and effect, so in the construction process, we should pay more attention to avoid this kind of situation. So we should pay attention to the corresponding problems,