外墻膩子粉的有點有很多，在很多行業都是有應用的，那么外墻膩子粉在行業中有什么應用？

There are many applications of exterior wall putty powder in many industries, so what are the applications of exterior wall putty powder in the industry?

膩子是外墻涂料涂飾時常用于基面處理的涂裝配套產品，主要作用是填補基層墻體的缺陷，對基面進行微找平，增加基面的平整度。膩子在外墻涂飾工程中的應用越來越受到重視。主要原因是許多外墻涂料涂飾工程中即使使用了優質涂料，仍會出現質量問題，特別是墻面出現大面積龜裂，剝落等現象。經分析發現，其根源不是涂料自身的質量和基礎墻體的問題，而是因為基層處理的膩子質量和涂料或基礎墻體不配套。因此膩子在建筑涂料涂飾工程中的地位越來越重要。

Putty is a coating matching product commonly used for base treatment in exterior wall coating. Its main function is to fill the defects of the base wall, perform micro leveling on the base surface, and increase the flatness of the base surface. The application of putty in exterior wall coating engineering is receiving increasing attention. The main reason is that even if high-quality coatings are used in many exterior wall coating projects, quality problems still occur, especially large-scale cracks and peeling on the walls. After analysis, it was found that the root cause is not the quality of the coating itself and the problem with the basic wall, but rather the quality of the putty treated at the grassroots level and the mismatch between the coating or the basic wall. Therefore, putty plays an increasingly important role in architectural coating and finishing engineering.

1：選擇合適的刮刀要真確的掌握刮刀的握持方法，在施工過程中要以刮涂有力、操作者省力、刮平、填實為原則。

1: Choosing a suitable scraper requires mastering the gripping method of the scraper accurately. During the construction process, the principles of strong scraping, labor-saving operation, leveling, and filling should be followed.

2：把膩子粉涂在底漆上，因為膩子粉的主要作用是填平，而且膩子粉沒有防銹功能，在涂刮膩子粉時應該以高點基層進行刮平。刮平的膩子粉不能太厚。爭取用較少的膩子粉達到做好的效果，節省原料費用。

2: Apply putty powder to the primer, as the main function of putty powder is to fill and level, and putty powder does not have anti rust function. When applying putty powder, it should be leveled with a high base layer. The putty powder scraped flat should not be too thick. Strive to achieve good results with less putty powder and save on raw material costs.

3：膩子粉的反復涂刮，一般膩子粉的涂刮需要三遍才能成活，因此在下一遍的涂刮中，需要等到膩子粉徹底干燥后才可以進行，否則會出現龜裂和氣泡。

3: The repeated application and scraping of putty powder usually requires three times to survive. Therefore, in the next application, it is necessary to wait until the putty powder is completely dry before proceeding, otherwise cracking and bubbles may occur.

4：輔助材料的添加  刮涂膩子粉完成后，可將涂料加入膩子粉中調配專用膩子粉，其他的填料有細木悄、石膏粉等。

4: After adding auxiliary materials and scraping putty powder, paint can be added into putty powder to prepare special putty powder. Other fillers include fine wood, gypsum powder, etc.

本文來自：濟南膩子粉更多的內容請點擊：http://www.daquanq.com.cn我們將會為您提問的問題提供一個滿意的服務，歡迎您的來電！

This article is from Jinan Putty Powder. For more information, please click: http://www.daquanq.com.cn We will provide satisfactory service for the questions you ask. Welcome to call us!