砂漿施工后出現氣泡如果處理就會容易出現空鼓起皮，導致砂漿掉落，那么產生氣泡的原因是砂漿的原因還是施工不當?shù)脑颍ＨA建材告訴您答案。

If bubbles appear after mortar construction, it will be easy to appear hollowing and peeling, which will lead to mortar falling. Is the cause of bubbles due to mortar or improper construction? Fuhua building materials will tell you the answer.

先說砂漿的原因，砂漿當中添加劑作用很大，增強砂漿施工性能，但是如果和其中的水泥反應不好，那么氣泡的產生，或是選用砂原材料的時候砂的細度太小導致孔隙率太高也會出現問題。

First of all, the reason for mortar is that additives play a great role in mortar, which can enhance the construction performance of mortar. However, if the reaction with cement is not good, then the generation of bubbles, or the fineness of sand is too small when using sand raw materials, resulting in high porosity will also have problems.

除了砂漿的原因砂漿的凝結時間不穩定和外界的問題都有關系，施工環境應該在一個合理的范圍內，在高溫的地方施工，砂漿保水率降低，那么凝結時間也會縮短，施工環境溫度太低也會引起緩凝劑摻量過高，引起砂漿凝結時間延長，所以在施工當中保證施工環境溫度和砂漿的保水率是非常的重要。

In addition to the reason of mortar, the unstable setting time of mortar is related to the external problems. The construction environment should be within a reasonable range. If the water retention rate of mortar is reduced in the high temperature place, the setting time will also be shortened. If the construction environment temperature is too low, it will also cause too much retarder, which will lead to the extension of mortar setting time. Therefore, the construction environment can be guaranteed during the construction Temperature and water retention rate of mortar are very important.

砂漿在施工之后會出現掉砂掉粉的情況，掉砂是干粉砂漿使用的砂細度太低，含泥量超標，就會導致沙子浮出表面，起砂，掉粉是生產干粉砂漿使用的沙子太細了，石粉的含量大，導致部分粉料上浮，聚集表面強度低而掉粉。

After the construction of mortar, there will be sand and powder dropping. Sand dropping is dry powder mortar. If the fineness of sand used is too low and the mud content exceeds the standard, the sand will float out of the surface and sand will rise. Powder dropping is that the sand used in dry powder mortar production is too fine and the content of stone powder is large, which will cause some powder to float up and gather, and the surface strength is low and powder dropping will occur.

所以建議施工仔細選用砂漿，施工注意操作步驟防止出現施工質量。

Therefore, it is suggested that the mortar should be carefully selected for construction, and the operation steps should be paid attention to to prevent the construction quality.